Specs and MSDS

Potential health effects

Inhalation
Negligible Threshold Limit Value unless heated to produce vapors. Minute sizes such as vapor particles may irritate the mucus membrane and cause irritation, dizziness and

nausea
Remove person from infected area and transfer t where fresh air is available.

Eye Contact
May cause irritation. Irrigate eye wit water for a minimum of 20 minutes Seek medical attention if symptoms persist.

Skin Contact
Prolonged contact is not likely to cause significant skin irritation. Thermal burns are possible since material often passes through elevated temperatures.

Ingestion
No hazards anticipated from ingestion from incidental and industrial exposure.

First Aid Measures
1. Respiratory
If vapor or mists are generated, wear approved organic vapor or mist respirator.
2. Protective Clothing
PVC coated gloves recommended to prevent skin contact. Safety glasses, goggles, or face shield recommended to protect eyes from mists splashing.
3. Others
Employees must practice good personal hygiene, washing exposed areas of skin several times daily and laundering contaminated clothing prior to re-use.

Skin
Wash exposed areas of the body with soap and water.

Inhalation
Remove from the area of exposure and seek for medical assistance if symptoms persist.

Eyes
Wash eyes with a heavy stream of water for a minimum of 20 minutes

Ingestion
Give 1 to 2 glasses of water to drink. If gastrointestinal symptoms develop, seek medical assistance.

Flash Point 79 -84°C
Flammability Limits not known
Extinguishing Media

Dry chemical, foam, halon, Co2, water spray. Water stream may splash the burning liquid and spread the fire.

Special Fire Fighting Procedures Use water spray to cool drums exposed to fire.

Unusual Fire and Explosion Hazards

Oil soaked rags can cause spontaneous combustion if not handled properly. Prior to disposal, wash rags with soap and water, let dry in a well ventilated area.

Firefighters should use self-contained breathing apparatus to avoid exposure to smoke and air.

Accidental Release Measures Spill Clean up Procedures
Remove sources of ignition, contain spill areas to a minimum. Use towel, sand or dirt to treat small oil spills. Recover large spills for salvage or disposal. Wash hard sources with safety solvent to remove oil film.

Handling and Storage
Store in a cool dry place between 10-35°C that is well ventilated. Keep away from oxidizing materials, excessive heat and ignition sources.

Do not use pressure when emptying product from a drum. Do not store nor use near heat, spark, flame.

Exposure Control / Hazard Protection
1. Respiratory
If vapor or mists are generated, wear approved organic vapor or mist respirator.
2. Protective Clothing
PVC coated gloves recommended to prevent skin contact. Safety glasses, goggles, or face shield recommended to protect eyes from mists splashing.
3. Others
Employees must practice good personal hygiene, washing exposed areas of skin several times daily and laundering contaminated clothing prior to re-use.

Stability and Reactivity
In general, this product is stable and hazardous polymerization will not occur.

Incompatible Materials and Conditions to Avoid
1. Strong oxidizing agents.
2. Hazardous Decomposition Products

Combustion produces carbon monoxide, carbon dioxide together with thick smoke.

Disposal Consideration
Water can be disposed by a licensed or authorized waste disposal company.
Contaminated absorbent materials maybe disposed of in approved sites.
Local regulations on proper waste disposal should be followed.

Physical and Chemical Properties

PROPERTY TEST METHOD TYPICAL VALUE
Color Visual / D 1500 0.5 – 1.50
Flash Point ASTM D93 79 -84°C
Neutralization No. ASTM D974 0.20 - 0.30
Pour Point ASTM D97 5.0 – 10.0
Viscosity ASTM D445 8.0 – 10.0
Sulfur Content ASTM D2622 none
Specific Gravity H2o = 1
Cloud Point EN 1890 20°C
pH EN 1262 7
Concentration Percent 99.8
Water Solubility soluble
Freezing Point 05°C
Physical Appearance liquid

Transport Information
UN HAZARD CLASS: N/A
NMFC –National Motor Freight Classification
Proper Shipping Name: SATURATED OIL
Identification Number: 144920

Handling and Storage
The information presented herein has been compiled from sources considered to be dependable and is accurate to the best of TUKS+OIL TECHNOLOGY knowledge; however, TUKS+OIL TECHNOLOGY makes no warranty whatsoever, expressed or implied, or merchantability or fitness for the particular purpose, regarding accuracy of such data or the result to be obtained from the use thereof. TUKSOIL TECHNOLOGY assumes no responsibility for the injury to recipient or to third persons or for any damage to property and recipient assumes all such risk.

 
Copyright © 2009 - 2012 Organic Tuks Oil. All right Reserve.
Design by Web Design Builders Philippines